Spring & lock washers

DIN 127B Spring Lock Washer Dimensions and RFQ Notes

DJ WASHERS manufactures DIN 127B split spring washers in spring steel (65Mn) for bulk orders. Review the reference dimensions below, then send DIN 127B, your size list and the quantity for each size to request a quote. Add any specified finish or packing requirement.

View DIN 127B dimensions
Product referenceSpring steel
DIN 127B spring lock washer
Confirm section and free height

Use the reference diagram to check section thickness and free height. For a special fit, include your drawing or critical dimensions.

Product photograph. Exact specification is confirmed in the quotation.

DIN 127B

10 metric tonnesMinimum for the whole washer order
Mix washer types and sizesMix types and sizes · Quantities per item

You can combine washer types and sizes in one order. The minimum is 10 metric tonnes for the whole order, not for each type or size. List the quantity for each item; the feasible combination and price are confirmed in the quotation.

Manufacturing & quality

From the press line to export loading.

Production Quality checks

Stamping press in production
01 / StampingPress productionSee the general production workflow and discuss the process required for your order. See production.
Caliper used to check washer dimensions
02 / InspectionDimensional checksSee the inspection workflow; confirm checks and documents for your specification. See quality checks.
Cartons loaded in an export container
03 / Export loadingPrepared for exportExport-loading reference. Packing and marking are agreed per order.

01 / Technical reference

Reference dimensions & standard comparisons.

Quick Specs

StandardsDIN 127B
Size rangeM2–M72
Material & FinishSpring steel; black oxide, electro-zinc plating, hot-dip galvanizing, mechanical zinc plating
HardnessConfirm the required value and acceptance method for the quoted item
DIN 127B symbolic views: d inside diameter, n radial section width, h section thickness and H free height.
Symbols follow this page’s table. H is the overall unloaded free height; h is the material thickness. Schematic only, not to scale.

Confirm section and free height

d
Inside diameter
n
Radial section width
h
Section thickness
H
Free height

Use the reference diagram to check section thickness and free height. For a special fit, include your drawing or critical dimensions.

Standards & Compliance

Use the standard or drawing, sizes and quantities to start an RFQ. Add special requirements where applicable.

DIN 127B split spring washers are used in bolted assemblies. Use the dimensions below to identify the item you need. For a special fit, check the DIN 127B H dimension / free height and include the drawing or critical dimensions with your inquiry.

DIN 127BSpring SteelBolted Assemblies

Standard Comparison: DIN 127, GOST 6402, ASME B18.21.1, JIS B 1251

Spring lock washers are quoted under different national standards depending on the destination market.

DIN 127 has been withdrawn as a formal standard, but buyers still cite DIN 127B in RFQs and we review those requests. GOST 6402, ASME B18.21.1 and JIS B 1251 are separate specifications. Use this comparison to identify the specification your order calls for; a similar name or nominal size does not establish interchangeability. Confirm the edition and critical dimensions against your drawing or purchase requirement before substituting any standard.

Spring Lock Washer Standard Comparison
StandardRegionSeries / formsNotes for RFQ
DIN 127 A / BGermany, de facto worldwideForm A turned-up ends, Form B plain endsForm B is the common export item; metric M2–M100; withdrawn standard but still the trade reference
GOST 6402-70Russia / CISLight (Л), Normal (Н), Heavy (Т), Extra heavy (ОТ)Confirm the required series, edition and dimensions against the purchase specification.
ASME B18.21.1USARegular, Heavy, Extra dutyInch sizes; hardness and section differ from metric DIN items
JIS B 1251JapanClass 2, Class 3 spring lock washersMetric; dimensions close to DIN 127B but not identical
ISO 7089 / ISO 7090—Plain washersISO 7089 and ISO 7090 apply to plain washers.

Reference data only, not a stock list or a promise that every listed size is available. Confirm the standard or drawing and supply for the quoted item. On smaller screens, scroll each complete table horizontally.

Specifications & Weight per 1000 pcs

The reference dimensions and weights help identify items and estimate packing. Final dimensions, tolerances, weight and availability are confirmed for the quoted item.

DIN 127B Spring Lock Washer Dimensions

Three range tables are retained from the internal standard data source.

Range Phi 2-Phi 12

Swipe horizontally to compare sizes; scroll back to the first column to check each parameter.

ParameterPhi 2Phi 2.2Phi 2.5Phi 3Phi 3.5Phi 4Phi 5Phi 6Phi 7Phi 8Phi 10Phi 12
d min2.12.32.63.13.64.15.16.17.18.110.212.2
d max2.42.62.93.43.94.45.46.57.58.510.712.7
n nominal (radial section width)0.9111.31.31.51.82.52.533.54
h nominal (section thickness)0.50.60.60.80.80.91.21.61.622.22.5
H min (free height)11.21.21.61.61.82.43.23.244.45
Approx. steel weight / 1000 pcs (kg)0.0330.0500.0530.110.120.180.360.830.931.62.533.82

Range Phi 14-Phi 45

Swipe horizontally to compare sizes; scroll back to the first column to check each parameter.

ParameterPhi 14Phi 16Phi 18Phi 20Phi 22Phi 24Phi 27Phi 30Phi 36Phi 39Phi 42Phi 45
d min14.216.218.220.222.524.527.530.536.539.542.545.5
n nominal (radial section width)4.5556677810101212
h nominal (section thickness)33.53.5445566677
H min (free height)6778810101212121414
Approx. steel weight / 1000 pcs (kg)6.018.919.7315.216.526.228.744.367.371.7111117

Range Phi 48-Phi 100

Swipe horizontally to compare sizes; scroll back to the first column to check each parameter.

ParameterPhi 48Phi 52Phi 56Phi 60Phi 64Phi 68Phi 72Phi 80Phi 90Phi 100
d min495357616569738191101
n nominal (radial section width)12141414141414141414
h nominal (section thickness)7888888888
H min (free height)14161616161616161616
Approx. steel weight / 1000 pcs (kg)123182193203218228240262290318

02 / Order requirements

Specify what the application needs.

Properties

These split spring washers are used in bolted assemblies. If vibration, joint loosening or another application condition is critical, state it with the required acceptance criteria. The product name alone is not a performance guarantee for every assembly.

  • Standard: DIN 127B split spring washer geometry
  • Material: commonly spring steel such as 65Mn
  • Dimensions: start with the required sizes; provide a drawing or critical dimensions for a special fit
  • Hardness: specify a value and acceptance method if your order requires them

Surface Finish

State the required finish and service environment if specified. Material, hardness, coating and document requirements can then be reviewed together for the quoted item. See the washer surface finish guide for finish-selection questions.

  • Examples to discuss: black oxide, electro-zinc, mechanical zinc, zinc-aluminum and polished finish; confirm the option for each order
  • Confirm coating with spring steel hardness and application environment
  • Batch quantity affects packing and finishing arrangement

Packing & RFQ Notes

For an initial quote, send the required standard or washer type, size list and quantity for each size.

  • Add specified material, finish, packing, inspection or document requirements
  • For a non-standard part or special fit, note the drawing or sample; the web RFQ form does not accept attachments
  • Need a physical sample? Request a Sample Kit.

Typical Applications

Bolted joint assemblies
Machinery and equipment assembly
Connections with specified assembly requirements
General maintenance fastener sets

03 / Request a quotation

Your item list.
A clear starting point.

Send your item list through the washer RFQ. For a mixed order, identify each washer type and standard with its sizes and quantities. We confirm the supply scope, packing and price in the quotation.

For a drawing or sample

For a non-standard part or special fit, note the drawing or sample in your RFQ and arrange to send it separately. The web form does not accept attachments.

Need a physical sample?

Request a sample kit → Availability and terms are confirmed separately.

Product: Spring & lock washers

DIN 127B spring washer inquiry

The RFQ opens with “Spring lock washer” selected. For mixed orders, identify the washer type and standard for each item.

  • Washer type or standard, sizes and quantities
  • Specified material, finish, packing or document needs
Open the washer RFQ

Supply scope, packing and price are confirmed in the quotation.

04 / Buying questions

Spring Lock Washer FAQ

  • What should I send for a DIN 127B spring washer quote?

    Start with DIN 127B, sizes and quantity for each size. Add specified finish, material, packing or document requirements. A drawing is helpful for non-standard or special-fit items.

  • Can I mix washer types and sizes in one order?

    Yes. List the type, size and quantity for each item. The whole-order minimum is explained above; the feasible mix is confirmed in the quotation.

  • Are DIN 127B, GOST 6402, ASME B18.21.1 and JIS B 1251 interchangeable?

    Do not assume so. Identify the required specification and edition, and check the critical dimensions and acceptance criteria for your order.

  • Which finish should I request?

    State the required finish and service environment if specified. We review the coating, material and any document requirements for the quoted item.

  • Can I send a drawing or request a sample?

    Yes. Note it in your RFQ and arrange to send the drawing or sample details separately; the web form does not accept attachments. Sample availability and terms are confirmed separately.