Ordering to DIN 125A

You can send the DIN 125A purchase list you already use. A drawing, previous order or part reference is a useful starting point. Keep the standard description on your inquiry and include any requirements agreed for that part, especially when you are changing suppliers.

If a supplier quotes ISO 7089 in response to your inquiry, ask them to identify it in the quotation. Compare the proposed washer with your requirements before accepting the change. For a repeat order with no proposed substitution, the existing agreed specification remains the starting point.

DIN 125A and ISO 7089: What To Compare

ISO 7089:2000 covers normal-series plain washers, product grade A, with 200 HV and 300 HV hardness classes. Product grade A and hardness class are separate requirements. A DIN 125A description on its own does not tell you which hardness was agreed for a particular order.

The following checks are useful when comparing quotations, especially if the supplier proposes a different standard.

CheckExisting DIN 125A requirementProposed ISO 7089 washer
Size and formUse the specified size, washer form and any drawing dimensions.Compare inside diameter, outside diameter, thickness and tolerances for that size.
HardnessRefer to the purchase specification or drawing.State the required class, such as 200 HV or 300 HV, and check it against the application.
Material and finishKeep the agreed material and surface treatment.Confirm the material, coating specification and any coating-related dimensional requirements.
Packing and inspectionInclude carton weight, labels and inspection documents where required.List these requirements separately in the quotation.

A Typical Quotation Check

For example, your purchase list may say “DIN 125A, M12, carbon steel, zinc plated” with the required quantity. Send that list as it is. If the quotation comes back as “ISO 7089, M12, 200 HV,” check the dimensions and tolerances, the required hardness and the zinc coating specification before approving the substitution. The nominal size alone is not enough to settle those points.

Once agreed, the quotation, order confirmation and inspection requirements should describe the same part. This gives both sides a clear basis for production and acceptance.

What To Send for a Quote

  • Your existing standard description, size list and quantity for each size.
  • Material, hardness and surface finish requirements, including coating details if specified.
  • A drawing or previous part reference where it adds information, with any special dimensions or tolerances.
  • Packing instructions, such as bag or carton quantities, carton weight, labels and pallet requirements.
  • Required inspection documents and the delivery destination. If alternatives are acceptable, say so.

How the Standards Are Related

DIN Media lists DIN 125-1:1990-03 as withdrawn and records DIN EN ISO 7089:2000-11 and DIN EN ISO 7090:2000-11 as its replacements. The DIN EN ISO 7089 record confirms this relationship. ISO 7089 covers normal-series plain washers; ISO 7090 covers the chamfered form. The BSI scope for ISO 7089:2000 identifies the two hardness classes.

These references explain the standards history. For an individual order, use the applicable standard edition, drawing and agreed requirements to decide whether a proposed washer is suitable.

For large outside diameter washers, see DIN 9021. For square washers, see DIN 436 and DIN 434. If you are assessing a new supplier as well as the part, our washer supplier qualification guide covers production, inspection, samples and packing.

FAQ

  • Is DIN 125A the same as ISO 7089?

    They are related flat-washer specifications, but the names alone do not confirm that two quoted parts meet the same requirements. Compare dimensions, tolerances, material, hardness and finish before accepting a substitute.

  • Can DJ WASHERS quote a DIN 125A purchase list?

    Yes. Send the DIN 125A list or drawing you already use. Include quantities and any material, hardness, finish and packing requirements so we can quote to your requirements.

  • What if my inquiry only says DIN 125?

    Send it as written, together with the size and quantity. A drawing or previous part reference can help clarify the washer form and any requirements missing from the description.

Ready to request a quote? Start with your DIN 125A or ISO 7089 size list and quantities. Send your washer inquiry →